SCOTT Patron eRIDE 930 Bike

The Bosch Performance Line CX is fully networked in the smart system, so it remains up-to-date even after purchase. With a maximum torque of 85 Nm, you really feel the difference in how your E-Bike handles. You can customize the Eco, Tour, Sport and Turbo riding modes in the E-Bike Flow app. Keep your E-Bike looking sleek thanks to the wireless speed sensor.

Thanks to their range, long service life, intelligent battery management system and easy handling, Bosch Power Tube lithium-ion batteries are among the most modern on the market. All those decades of Bosch experience has paid off! PowerTube: 400Wh, 500Wh, 625Wh, 750Wh

For the optimal performance of a suspension shock, power transfer must be the most direct possible. What we want to avoid are any inefficient directional movements, in other words, lateral movements (sideways to the direction of travel) as the shock goes through its compression. 

Having an integrated shock allows us to improve this in several ways. Firstly, the frame construction around the shock and with the trunnion mount can be designed to be much more rigid, reducing movement and fostering more efficient power transfer. We can also add much larger bearings to the seat tube pivot, further reinforcing this area and reducing any unnecessary motion. Our integrated Suspension technology also helps us to engineer frames with a lower motor and battery placement which lowers the center of gravity. As a result, the bike benefits from better handling, and a more stable, confidence inspiring ride for the end user. 

Accessing the shock via the top tube area is facilitated through a hatch. By rotating the dial with your fingers or a coin, it will unlock the mechanism and gives access to the shock. This makes it easy to adjust rebound, compression, shock pressure, and for installing or replacing the cable for our TwinLoc Suspension System.

Electric mountain bikes have a crowded handlebar, between the brakes, dropper post, gears, drive unit cables, remote and suspension lockout - that’s a lot of cables. Syncros’s designers worked on the shape to allow the cables to flow under the bar and around the sides of the stem before disappearing into the headset with integrated plastic parts to keep it clean and efficient. This avoids bends or kinks in the cables and provides a minimalist front end.  All our bars and stems feature multiple options for computer, light and camera mounts both on top or under the bar.

With TwinLoc, a rider can effectively control the complete frame, fork, and shock as a system. Why does this matter? A bike with 150mm of suspension travel, correctly set up, has more sag than a bike with 130mm. It's that extra travel that makes it more fun to ride and more capable on the descents, but the greater sag has an oversized effect on the bike's geometry and climbing performance. That's where TwinLoc matters.

TwinLoc helps manage the sag effect in several ways. Whereas most systems only increase low-speed compression in an effort to gain pedaling efficiency, TwinLoc allows us to not only change compression damping, but also to change the spring curve, dynamically altering the geometry of the bike. In Trail mode, the shock is not only firmer, but it has dynamically less travel. The bike sits higher, maintains a steep seat angle for those climbs, and becomes more agile. We also offer a third, full lockout mode for going up in the most efficient manner possible.

These unique settings optimize climbing geometry, even on longer travel bikes. We can eliminate the "long travel effect" that can rob your pedaling efficiency, but we're not robbing you of the full-fun, 150mm travel when you point it downhill. From a race setting, to a lunch ride, to an after work trail shred, being able to switch from mode to mode depending on a trails profile at the push of a lever is paramount to riding faster and having a damned good time. 

A front and a rear fender are delivered with the bike, both fenders are tailor made for the Patron for a clean and perfect adjustment. For optimal security, the rear fenders come with integrated LED lights that are directly powered by the motor battery. A cable is already routed, and a plug already mounted on the handlebar for afront light. A range of Syncros accessories are available for the Patron eRIDE such as a kickstand, a rear fender, a rear rack or an action camera mount.