SCOTT Strike eRIDE 910 EVO Bike

With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up.

With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments.

With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without sacrificing the stiffness, comfort or impact resistance. The entire range benefitted from our Evo-Lap technology.

A front and a rear fender are delivered with the bike, both fenders are tailor made for the Patron for a clean and perfect adjustment. For optimal security, the rear fenders come with integrated LED lights that are directly powered by the motor battery. A cable is already routed, and a plug already mounted on the handlebar for afront light. A range of Syncros accessories are available for the Patron eRIDE such as a kickstand, a rear fender, a rear rack or an action camera mount.

The new Performance CX generation is now 48% smaller and 25% lighter compare to the previous generation. More compact but no less powerful, the new Bosch Performance CX Generation 4 comes with a maximum power output of 75Nm and 340%. Choose between 5 assist modes or opt for the comfort of the eMTB mode which automatically adapts the assistance like an automatic gearbox does in a car.

Thanks to their range, long service life, intelligent battery management system and easy handling, Bosch Power Tube lithium-ion batteries are among the most modern on the market. All those decades of Bosch experience has paid off! PowerTube: 400Wh, 500Wh, 625Wh, 750Wh

The Addict eRIDE shares the same DNA as the Addict RC. We have implemented all our latest technologies, from the internal cable routing to the carbon construction. The electric version of the Addict leaves nothing to want for. With regards to design, they are very similar. It’s hard to tell which one is the Addict eRIDE and which the RC version. The future is now. 

In order to mount a front or rear light, we have already routed the cables in the frame, and there is no need for an extra battery – the power comes straight from the drive unit battery.

Feel free to install a rack and the corresponding fender set. The frame has dedicated fixation points for a clean and reliable solution. Racks and fenders are available on the Accessories page of the website. 

With TwinLoc, a rider can effectively control the complete frame, fork, and shock as a system. Why does this matter? A bike with 150mm of suspension travel, correctly set up, has more sag than a bike with 130mm. It's that extra travel that makes it more fun to ride and more capable on the descents, but the greater sag has an oversized effect on the bike's geometry and climbing performance. That's where TwinLoc matters.

TwinLoc helps manage the sag effect in several ways. Whereas most systems only increase low-speed compression in an effort to gain pedaling efficiency, TwinLoc allows us to not only change compression damping, but also to change the spring curve, dynamically altering the geometry of the bike. In Trail mode, the shock is not only firmer, but it has dynamically less travel. The bike sits higher, maintains a steep seat angle for those climbs, and becomes more agile. We also offer a third, full lockout mode for going up in the most efficient manner possible.

These unique settings optimize climbing geometry, even on longer travel bikes. We can eliminate the "long travel effect" that can rob your pedaling efficiency, but we're not robbing you of the full-fun, 150mm travel when you point it downhill. From a race setting, to a lunch ride, to an after work trail shred, being able to switch from mode to mode depending on a trails profile at the push of a lever is paramount to riding faster and having a damned good time. 

With its colored screen, see everything at a glance: speed, distance, power, cadence and calorie consumption – Connected to the powermeter inside the motor, the Kiox 300 shows directly your fitness data. Operating with the handlebar controller, it’s easy to change screens and modes or activate the walk assistance. The Bluetooth connection will automatically detect your phone for updates and sharing info.  

Use the E-Bike Flow app to control all functions of the smart system, connecting the drive unit, battery, display and control unit. It allows you to customize the E-Bike exactly to your preferences, enhance it and keep it up to date: You can simply download new features and services, connecting updates for your E-Bike via Bluetooth. This keeps your E-Bike up to date and continuously upgraded with new features. This is how you can take your riding enjoyment to even higher levels.

The Bosch Performance Line CX is fully networked in the smart system, so it remains up-to-date even after purchase. With a maximum torque of 85 Nm, you really feel the difference in how your E-Bike handles. You can customize the Eco, Tour, Sport and Turbo riding modes in the E-Bike Flow app. Keep your E-Bike looking sleek thanks to the wireless speed sensor.