Vélo SCOTT Genius 900 Tuned

Boost is a hub and drivetrain standard developed by SRAM. Boost is built around a wider rear and front hub and enables stiffer wheels due to a wider spoke bracing angle. Boost 148 rear hubs move each flange of the rear hub three millimeters wider.

Boost is designed as a complete system so drivetrain performance isn’t compromised. Even though Boost pushes the cogs three millimeters outboard, the crankarm Q-Factor remains the same as the Boost system’s crankset utilizes front chainrings that sit a corresponding 3mm outward to ensure the required chainline. Boost cranks can onlybe used when paired with a 148mm hub. On the front the hub spacing is increased by 10mm to 110mm. Increased wheel stiffness and greater clearance for bigger tires are the main advantages of Boost technology. On our bikes, we wanted to go beyond the basics and reap all the benefits of this innovation by optimizing frame design and geometry.The 3 mm outboard chain ring adds clearance in the chain stay area that allows a substantial increase of the chain stay tube cross-section. Correspondingly,the stiffness in this part of the frame improves. Also, with a wider range of positions for the rear wheel, the frame geometry can be adjusted. We can shorten the chainstays for more agile handling.

Our integrated chain guide was developed in collaboration with the SCOTT SRAM MTB Racing Team. 

The idea behind was to create a reliable component that helps to avoid dropping chains but that was light, versatile and integrated in the design of the frame. The new Spark chain guide weighs just 23 grams and is easy to assemble thanks to the smart assembly system and can accommodate chain rings from 30 to 36 teeth.

With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA(finite element analysis) software, to map out the carbon lay-up.

With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments.

With our Evo-Lap technology we model the frame to optimize the surfacearea, simulate tube structures with different ply orientations, observethe results of using diff erent configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefitted from our EvoLap technology.

On the Scale, Spark and Genius we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffnessand avoids damage to the frame in case of impacts on the rear derailleur.

We have adopted the new Metric shock sizing standards with a Trunnion mount. Since the shock body now extends between the two lower mounting bolts, our suspension partners have more design space. This means the shock has more stroke for the same eye to eye length. Stroke on the 165mm eye to eye shock has increased from 38mm to 40/45mm.The Trunnion standard also offers structural gains. The shorter shock enables us to build a very compact frame and shock package, which integrates tightly to the seat tube. We managed to have a very tiny yet stiff linkage-lighter than ever. Thanks to the Trunnion mount construction, stand over height on the new Spark is very low. We are still able to realize a super compact full suspension frame and provide the ability to mount both a small and big water bottle.

The Spark family maintains the 165mm eye-to-eye shock length of the previous Spark 900 (our shortest shock), but realises up to 7mm more shock stroke. All Spark RC and most Spark and Spark Plus bikes utilize the FOX Nude shock, specially made for SCOTT:

-165mm Metric Trunnion shock

-40mm (100mm travel RC Spark line-up) vs. 38mm (old Spark)

-45mm (120mm travel Spark line-up)

By turning the Trunnion shock upside-down, we can fully integrate it into the frame which results in several benefits.Since the Trunnion mount is the same width as the down tube and mainpivot, we can have a very clean frame design in this critical area. The lack of tight transitions and small details allows for an efficient, continuous carbon structure. Carbon material added to reinforce the shock mount also stiffens the connection between the down tube, main pivot and bottom bracket, a key stiffness path.

The flipped shock also lowers the frame’s center of gravity helping to give a more planted feel when riding. Unsprung mass is reduced since it is the lighter part of the shock, connected to the linkage, not the heavier body which must move during an impact – the suspension system can react faster.Our TwinLoc remote cable can be routed cleanly into the down tube.

The Syncros Trail Fender is made from a high impact PP composite that balances stiffness and durability. Designed to work specifically with Fox 34 and 36 Boost forks, the Trail Fender features a 2-bolt direct mount and a patent pending, bottom out clearance design. This means a clean and reliable mount for a fully integrated fender. 

One of the highlights of the new genius is the Syncros Integrated handlebar. The Syncros Hixon iC is a truly revolutionary product, combining a traditional bar and stem combination into a single component. Thanks to a unique new construction method and high quality carbon this one-piece bar will be the new benchmark for trail riding with a weight of 290g. 

Our suspension kinematic brings perfect balance and control to the Genius platform. Using our Virtual Four Link design, we have honed our suspension feel, pedaling and braking response to work with maximum efficiency and in harmony with our TwinLoc Suspension System. Our kinematic suspension curve gives supple small bump sensitivity and therefore exceptional traction characteristics, perfect support in the mid-stroke and a controlled deep stroke for predictable and comfortable bottom outs. Specific pivot placements ensures efficient pedaling that drives the bike forwards like a startled greyhound and neutral braking that strikes a perfect balance between rider comfort and control, chassis stability and rear wheel traction. From the XC racer, to the downhill enthusiast, the new Genius kinematic brings improvements and advantages in all areas and gives a solid fundamental basis for a bike for all riders and all conditions. 

The Genius has always been a bike designed to go up as well as it went down, and vice a versa. For 2018, we wanted to re-emphasize this point. We designed the Genius specifically in search of balance. Compared to the previous iteration, this one is slacker, has longer reach, shorter chainstays and a steeper seat angle. We really wanted geometry figures that would balance out the long front end for more stable descending. What we've ended up with is a bike that climbs like a bat out of hell and gets you down the mountain faster than you can say "dropping!" After years of testing different options, these numbers are a result of taking everything we want out of a bike for the trails we ride, and building it. 

With the new Genius, we wanted to make sure that versatility was still achieved. Unlike much of the competition, the new Genius can switch from 27.5" to 29" wheels with nothing more than the flip of a chip. No need to change the fork, all you need to do is flip a shock mount chip, change your wheels and off you go. The flip chip allows us to maintain a similar BB height when switching from one wheel size to the other which is key to keeping handling similar for both wheel sizes. With 27.5" wheels, you can run either 2.5", 2.6" or 2.8" tires. For the 29er, anywhere from 2.4"-2.6" is good to go. The Genius has always been a bike for everyone. Now, more so than ever this rings true. One frame, a multitude of options. 

En savoir plus au sujet de TwinLoc ici : https://www.scott-sports.com/page/twinloc

Grâce à TwinLoc, le cycliste peut contrôler efficacement l'ensemble du cadre, la fourche et l'amortisseur. En quoi est-ce important ? Une fois bien réglé, un vélo avec un débattement de suspension de 150 mm a une plus grande déformation que son équivalent de 130 mm. Ce débattement supplémentaire apporte une touche de satisfaction supplémentaire et rend le vélo plus habile en descente, mais en montée, un sag plus important a un effet néfaste sur la géométrie et les performances du vélo. TwinLoc résout le problème.

TwinLoc aide à gérer l'effet de déformation de plusieurs manières. Alors que la plupart des systèmes se contentent d'augmenter la compression lente pour tenter de gagner en efficacité de pédalage, TwinLoc nous permet non seulement de modifier l'amortissement en compression, mais également de changer la courbe de l'amortisseur de manière dynamique, ce qui altère la géométrie du vélo. En mode Trail, l'amortisseur est plus ferme et dispose également d'un débattement plus faible. Le vélo est placé plus haut sur le débattement, il garde un angle du tube de selle optimal pour les montées et devient plus agile. Nos vélos présentent également un troisième mode, Lockout, pour attaquer efficacement les montées.

Ces réglages uniques permettent une géométrie optimisée en montée, même sur les vélos au débattement plus long. Nous pouvons annuler « l'effet long débattement » qui peut nuire à l'efficacité de votre pédalage. Nous vous laissons cependant tout le loisir d'apprécier votre débattement de 150 mm en descente. Lors d'une course, d'une sortie à la pause déjeuner ou même d'une escapade sur les trails après le travail, le changement de mode en fonction du terrain, à la simple pression d'un levier, est indispensable à tout cycliste qui veut rouler plus vite tout en s'amusant. 

On the Scale, Spark and Genius, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut.

Alors que nous utilisions déjà la fibre composite certifiée HMF sur tous nos modèles de vélos composites haut de gamme, nous avons perfectionné notre matière HMF conventionnelle. Cette nouvelle fibre, produite en exclusivité pour Scott, offre 20 % de rigidité supplémentaire et est utilisée dans toutes les zones qui requièrent une rigidité accrue. Cette nouvelle matière nous permet également de réduire le poids et d'améliorer les caractéristiques de conduite. NET est l'acronyme de Naked External Tube set (ensemble de tubes externes nus) ; le cadre perd sa couche cosmétique extérieure, ce qui permet de gagner encore un peu plus en légèreté.

Working together with DT Swiss, we completely revisited the shape of the thru-axle lever to make it more ergonomic and to perfectly fit to ourframe. Additionally we introduce a new multifunctional tool integrated on the inner part of the thru-axle itself. This 25T torx wrench is easy to reach and ready to be used for quick adjustments on the trails.

"The SCOTT Genius 900 Tuned redefines efficiency when it comes to trail bikes. The stiffness of the lightweight frame, its TwinLoc suspension technology, and its superb spec fuse to make this a very quick bike which climbs with just as much pedigree.
Add in its achingly hip angular design and one-piece Syncros Hixon SL iC cockpit, and you’ve got a bike that sets new standards of style. The great package is completed – crucially – with great descending capability.

Agile and smooth when needed, the SCOTT Genius 900 Tuned handles with precision thanks its progressive suspension. The Flip-Chip on the rear shock mount makes the bike a chameleon that can work with both 29" and 27.5" wheels.

The ultimate rig for any rider looking for a no-holds-barred performance on both the climbs and descents, this bike can confidently pin on a number for a marathon or an enduro!"

More info here