SCOTT 550 Stripes ECE Helmet
Modello : 268018
Caratteristiche principali
- Tecnologia MIPS®
- Tecnologia Conehead
- Sistema di ventilazione perfetto
- Ventilazione regolabile
- Tecnologia In-mold
1. Colore : deep blue
2. Taglia
CHF 300.00
Consegna entro 3-5 giorni lavorativi dallordine
Spedizione gratuita per ordini superiori ai CHF 149.00
Resi gratuiti entro 14 giorni
- Der SCOTT 550 Stripes Helm ist ein innovativer, hochwertiger Helm, der die Möglichkeiten der Belüftung und der Sicherheit ausreizt. Der Helm verfügt über die neuesten Sicherheitsmerkmale, wie das MIPS® Brain Protection System und die Conehead-Technologie, und bietet den Fahrern mehr Schutz, indem er Einwirkungen der radialen und Rotationskräfte während eines Sturzes reduziert. Das erstklassige, fortschrittliche Kühlungsmanagement-System des 550er bietet den Fahrern die beste Belüftung am Markt durch Verwendung von geschickt platzierten Lüftungsöffnungen auf dem ganzen Helm, um die Luftzirkulation zu maximieren. Das Ergebnis ist ein bequemer, sicherer und stylischer Helm, der dir hilft, dich voll und ganz auf die Fahrt zu konzentrieren.
-
Konstruktion
In-Mold-Technologie -
Fit System
Nein -
Eigenschaften
Optimierte und anpassbare Belüftung
3D-geformter Foam
Futter und Wangenpolster herausnehm- und waschbar -
Größen
XS–XXL
Cone-Head Technology™
CONEHEAD™ is a revolutionary method of molding EPS foam to increase the impact properties of helmets. The helmet is molded in two stages and features two parts in two different densities, with a unique conical interface.
How Conehead TechnologyTM works ?
There are two different densities of foam as well as two different foams with their own characteristics of recovery from impact and inter-foam bond strength. In a crash, the impact force pushing towards the head causes the cones to compress which creates lateral forces spreading sideways through the higher density outer foam layer. Impact energy/force is absorbed by this lateral motion. At the same time, the head is travelling in the opposite direction, compressing the base of the lower density cones and slowing the accelerating head. The result is lower G-force experience for your head.
The benefit: a lighter helmet + softer protective shock absorbing foam closer to your head.
MIPS® Safety System
The brain is typically more sensitive to rotational motion than linear motion because it has shear properties similar to water or gel. When different parts of the brain move relative to each other because of rotational motion, the tissues can stretch, which can cause concussions or other brain injuries.
Rotational motion is a common cause of concussions and more severe brain injury in oblique hits to the head. The Mips® safety system consists of a low friction layer mounted inside the helmet. In a crash, the low friction layer is designed to move slightly inside the helmet to help redirect forces away from the head. This is intended to help reduce the risk of brain injury.
A SAFETY SYSTEM THAT MIMICS THE BRAIN
Unlike traditional helmets, which are mainly designed and tested for straight impacts, the Mips® safety system’s low-friction layer mimics the brain’s own system for protection against rotational motion.
STRAIGHT VS ANGLED IMPACTS
Traditional helmets are designed for straight impacts, but most impacts are angled.
The low friction layer is designed to reduce the rotational force of angled impacts.
Trova l’ispirazione
