Casco Scott 350 EVO Plus Track ECE
Modèle : 273108
Caractéristiques clés
- Tecnologia MIPS®
- Tecnologia Conehead
- Ventilazione ottimizzata
- Calotta in ABS
1. Couleur : blue/teal
2. Taille
CHF 250.00
Livraison: 3-5 jours ouvrables après la commande
Livraison Offerte pour les commandes à partir de CHF 149.00
Retours gratuits Sous 14 jours
- Combinando materiali d’alta qualità ed un design all’avanguardia, il casco SCOTT 350 Evo Plus Track offre un elevato livello di protezione grazie all’integrazione del MIPS® Brain Protection System e della tecnologia Conehead. Assieme, questi sistemi offrono ai motociclisti una maggiore protezione riducendo l’impatto sia delle forze rotazionali che radiali in caso di incidente. Se sei alla ricerca di sicurezza e stile questo casco è la scelta giusta per te.
-
Costruzione
Calotta in ABS -
Fit Sistema
No -
Caratteristiche
Ventilazione ottimizzata
Imbottitura e guanciali rimovibili e lavabili
Visiera facilmente regolabile -
Taglia
S-XL
MIPS® Safety System
The brain is typically more sensitive to rotational motion than linear motion because it has shear properties similar to water or gel. When different parts of the brain move relative to each other because of rotational motion, the tissues can stretch, which can cause concussions or other brain injuries.
Rotational motion is a common cause of concussions and more severe brain injury in oblique hits to the head. The Mips® safety system consists of a low friction layer mounted inside the helmet. In a crash, the low friction layer is designed to move slightly inside the helmet to help redirect forces away from the head. This is intended to help reduce the risk of brain injury.
A SAFETY SYSTEM THAT MIMICS THE BRAIN
Unlike traditional helmets, which are mainly designed and tested for straight impacts, the Mips® safety system’s low-friction layer mimics the brain’s own system for protection against rotational motion.
STRAIGHT VS ANGLED IMPACTS
Traditional helmets are designed for straight impacts, but most impacts are angled.
The low friction layer is designed to reduce the rotational force of angled impacts.
Cone-Head Technology™
CONEHEAD™ is a revolutionary method of molding EPS foam to increase the impact properties of helmets. The helmet is molded in two stages and features two parts in two different densities, with a unique conical interface.
How Conehead TechnologyTM works ?
There are two different densities of foam as well as two different foams with their own characteristics of recovery from impact and inter-foam bond strength. In a crash, the impact force pushing towards the head causes the cones to compress which creates lateral forces spreading sideways through the higher density outer foam layer. Impact energy/force is absorbed by this lateral motion. At the same time, the head is travelling in the opposite direction, compressing the base of the lower density cones and slowing the accelerating head. The result is lower G-force experience for your head.
The benefit: a lighter helmet + softer protective shock absorbing foam closer to your head.
